Wheel Chocks

Hearing Protection

Racks and Dispensers

Boots

Gas Monitors/Detectors

Gloves

Locks & Lockouts

Mirrors

Other Safety Supplies

Air Guns

Anti-Static Wire

Batteries

Cable Management Systems

Concrete Wrap

Electrolyte Drinks & Supplies

Hose Bridge Systems

Measuring Devices

Odds & Ends

Rebar Caps

Rope Grabs

Rubber Duct Protectors

Traffic and Parking Control

Warning Whips and Accessories

Wheel Chocks

Material Handling

Carts

Drinking Fountain

Shelving

Electrical Cords

Cribbing

Lead Test Kits

Beard Cover

Respiratory Protection

Storage

Payment Processing

Home > Other Safety Supplies > Wheel Chocks

Sort By:

Page of 7

MS1602-3 - CheckersÂ® Roadblocksâ„¢ UC1500, 1600 and 1700 Wheel Chock Accessories-Cable Loop Handle

MS1602-3 - Checkers® Roadblocks™ UC1500, 1600 and 1700 Wheel Chock Accessories-Cable Loop Handle

Our Price: $22.94

Safety Cable Loop For UC Series Wheel Chocks

Orange plastic-coated cable loop handle with reflective stripe. For Model UC1500, UC1600 and UC1700 series Chocks

Sold by the each

Chock not included

https://www.checkers-safety.com/mpattachments/file...

RC450-S - CheckersÂ® Roadblocksâ„¢ 450 Series Rubber Wheel Chocks with Solid Bottom

RC450-S - Checkers® Roadblocks™ 450 Series Rubber Wheel Chocks with Solid Bottom

Our Price: $25.21

General-Purpose Rubber Wheel Chock With Solid Bottom

Standard of the Utility Industry.

Roadblocks™ 450 Series Rubber Wheel Chocks feature the chock design used by most utility and telephone fleets. They are strong, safe and resistant to damage from UV, moisture, salt and oils. Their traction design grips tire and road and will not cause tire or pavement damage. The chock design also allows either side to be positioned against tire.

Sold by the each
Dimensions: 13.5"L x 7"W x 4.5"H

FEATURES:

Durable rubber construction.
Made from recycled materials.
Resistant to damage from UV, moisture, salt and oils.
Steel loop carrying handle.
Fits most chock storage compartments.
Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

RC450 - CheckersÂ® Roadblocksâ„¢ 450 Series Rubber Wheel Chocks with Bottom Void

RC450 - Checkers® Roadblocks™ 450 Series Rubber Wheel Chocks with Bottom Void

Our Price: $26.13

General-Purpose Rubber Wheel Chock With Cored Bottom, Utility Vehicles

Standard of the Utility Industry.

FEATURES:

Durable rubber construction.
Made from recycled materials.
Resistant to damage from UV, moisture, salt and oils.
Steel loop carrying handle.
Fits most chock storage compartments.
Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

RC815 - CheckersÂ® Roadblocksâ„¢ 815 Series Rubber Wheel Chock with Bottom Void

RC815 - Checkers® Roadblocks™ 815 Series Rubber Wheel Chock with Bottom Void

Our Price: $26.24

General-Purpose Rubber Wheel Chock With Cored Bottom, Trucks & Trailers - RC815

RC815 GENERAL PURPOSE WHEEL CHOCKS are designed for "over the road" trucks and trailers, and loading dock facilities. They are composed of durable rubber that make them strong and safe in industrial applications. These chocks are resistant to damage from UV, moisture, salt, and oils. Their ribbed pyramid design grips the tire and road and will not cause tire or pavement damage. The chock design also allows either side to be positioned against tire. RC815 Wheel Chocks are built to suit a variety of applications in the construction, utility, and other commercial industries.

Dimensions: 10.5"L x 7.5"W x 5.5"H

Sold by the each

FEATURES:

Durable rubber construction.
Made from recycled materials.
Resistant to damage from UV, moisture, salt and oils.
Ribbed pyramid design.
Eye bolt for ropes or chains.
Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

RC5510-S - CheckersÂ® Roadblocksâ„¢ 5500 Series 10" Rubber Wheel Chock with 24" Tow Rope

RC5510-S - Checkers® Roadblocks™ 5500 Series 10" Rubber Wheel Chock with 24" Tow Rope

Our Price: $35.37

10" Aviation Wheel Chock, Rubber, Roped Single

Triangular design used for aircraft worldwide.

Roadblocks™ 5500 Series Rubber Wheel Chocks are ideal for aircraft applications. They are strong, safe, maintenance-free, and resistant to damage from UV, moisture, salt and oils. These high-density rubber chocks feature heavy duty horizontal traction ribs that flex and provide greater grip as pressure is applied. The chock design allows either side to be positioned against tire. Standard with 24 in. (610 mm) replaceable nylon rope lanyard.

Sold by the each
Dimensions: 9.5"L X 5.25"W X 5.25"H

FEATURES:

High density rubber construction.
Maintenance free.
Resistant to damage from UV, moisture, salt and oils.
Horizontal traction ribs.
Replaceable 24 in. polyester rope lanyard
Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

UC1700 - CheckersÂ® Roadblocksâ„¢ 1700 Series Urethane Wheel Chocks

UC1700 - Checkers® Roadblocks™ 1700 Series Urethane Wheel Chocks

Our Price: $36.83

General-Purpose Utility Wheel Chock, 30,000 Lbs Load Capacity, 27-35 In. Tires

Designed for small utility trucks, trailers, pick-ups, and automobiles.

The Checkers™ general-purpose UC1700 utility wheel chocks for ground vehicles are manufactured with highly durable, lightweight polyurethane and are 3rd party tested, certified, and trusted by fleets globally. These chocks are ideal for use with over-the-road trucks, trailers, pickups, and utility vehicles. Rated for vehicles with tire sizes up to 35 in. (88.9 cm) diameter, and gross vehicle operating weight up to 30,000 lbs. (13,636 kg). UC1700 wheel chocks are available in singles or pairs (pairs of wheel chocks are attached with a 48" long piece of 5/8" Nylon rope between the chocks).

Sold Individually

FEATURES:

Tough urethane construction.
Resistant to damage from oil and chemicals.
Recessed carrying handle on back of chock.
Mounting hole for ropes, chains or brackets.
High visibility orange color.
"How to Use" guidelines molded into each wheel chock.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

RC5512-S - CheckersÂ® Roadblocksâ„¢ 5500 Series 12" Rubber Wheel Chock with 24" Tow Rope

RC5512-S - Checkers® Roadblocks™ 5500 Series 12" Rubber Wheel Chock with 24" Tow Rope

Our Price: $37.73

12" Aviation Wheel Chock, Rubber, Roped Single

Triangular design used for aircraft worldwide.

Sold Individually
Dimensions: 11.5"L X 11"W X 5.25"H

FEATURES:

High density rubber construction.
Maintenance free.
Resistant to damage from UV, moisture, salt and oils.
Horizontal traction ribs.
Replaceable rope lanyard.
Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

MS1602-1-10 - CheckersÂ® Roadblocksâ„¢ Wheel Chock Accessories-10' EconoChain

MS1602-1-10 - Checkers® Roadblocks™ Wheel Chock Accessories-10' EconoChain

Our Price: $40.93

10' Economy Dock Chain For UC Series Wheel Chocks

ECONOMY DOCK CHAIN WITH HARDWARE

For connecting wheel chocks to loading dock. 2/0 (3.4 mm) chain rated 225 lbs. (116 kg) working load limit.
Includes attachment link and dock hanger.
10 Foot Length

Sold by the each

Chock not included

https://www.checkers-safety.com/mpattachments/file...

RC5515-S - CheckersÂ® Roadblocksâ„¢ 5500 Series 15" Rubber Wheel Chock with 24" Tow Rope

RC5515-S - Checkers® Roadblocks™ 5500 Series 15" Rubber Wheel Chock with 24" Tow Rope

Our Price: $44.89

15" Aviation Wheel Chock, Rubber, Roped Single

Triangular design used for aircraft worldwide.

Dimensions: 14.5"L X 5.25"W X 5.25"H

Sold Individually

FEATURES:

High density rubber construction.
Maintenance free.
Resistant to damage from UV, moisture, salt and oils.
Horizontal traction ribs.
Replaceable rope lanyard.
Either side of wheel chock can be positioned against the tire.

WARNING - WHEEL CHOCK USER GUIDELINES

WARNING! Individual end user testing required to ensure proper chock selection and application.
Select wheel chocks appropriate to type and size of vehicle.
Chocks shall be used only after vehicle is completely stopped and parking brakes fully applied and tested.
Position wheel chocks snugly and squarely against the center of the tire tread area of each wheel.
Always use wheel chocks in pairs and on firm surfaces.
More than one pair may be required.
Chock in direction of grade.
Chock wheels on both sides of vehicle in direction of grade.
Test chocks to ensure they meet requirements.
Chocks are effective holding devices when properly sized and positioned.
Always remove wheel chocks before attempting to move vehicle.
Do not drive over wheel chocks.
Improper use can result in product failure.
Although these are generally acceptable chocking procedures, it is the decision of each individual user to determine the best chock and chocking method for the particular application.

https://www.checkers-safety.com/mpattachments/file...

MS1602-1-12 - CheckersÂ® Roadblocksâ„¢ Wheel Chock Accessories-12' EconoChain

MS1602-1-12 - Checkers® Roadblocks™ Wheel Chock Accessories-12' EconoChain

Our Price: $45.54

12' Economy Dock Chain For UC Series Wheel Chocks

ECONOMY DOCK CHAIN WITH HARDWARE

For connecting wheel chocks to loading dock. 2/0 (3.4 mm) chain rated 225 lbs. (116 kg) working load limit.
Includes attachment link and dock hanger.
12 Foot Length

Sold Individually

Chock not included

https://www.checkers-safety.com/mpattachments/file...