Column Sentry® products are installed by wrapping 2" (50mm) nylon weave straps around and fastening by hook and loop closure.
Replacement straps are available in any size (S,M,L,XL) with hook and loop closures.
Fits any brand rack with an upright face 75mm (3") wide. RS75 is 457mm (18") tall with an overall width of 133mm (5.25"). The opening is 75 x75mm (3"x3") but will fit any rack with the correct width face.
Sold by the Carton of 18 Rack Sentry® rack protectors attach to your rack uprights, protecting them from the abuse from collisions with your forklifts. Constructed of a flexible EVA material, Rack Sentry® gives your racks a highly visible layer of protection that's easily installed without tools. Rack Sentry is available in a number of sizes to fit most uprights. Additionally, there are models available for low beam installations and for end racks. Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing, returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product. Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor. For use in temperatures below 0°C, the use of Rack Sentry LT (Low Temperature) is recommended.
Fits any brand rack with an upright face 75mm (3") wide.RS75CO is 457mm (18") tall with an overall width of 133mm (5.25"). The CO version includes a 150mm (6") offset cutout 127mm (5") from one end to cover racks with low beams.
The Rack Sentry® Cutout product features a cutaway section on the return arms to allow it to be placed on racking with beams located down to 5" from the floor. This option allows the use of Rack Sentry® on virtually any upright.
Previously Rack Sentry® could only be used on rack uprights without intersecting beams. This new option gives users the ability to use Rack Sentry practically anywhere needed. The location of the cutout is offset so that it can be placed either 5" or 7" from the floor, depending on which end is placed down. This allows more flexibility in placement while keeping protection where you need it.
We know of no other protective product in the world that offers protection below, above, and at the low beam placement.
Fits any brand rack with an upright face 80mm (3.25") wide. RS80 is 457mm (18") tall with an overall width of 133mm (5.25"). The opening is 80x75mm (3.25"x3") but will fit any rack with the correct width face.
Fits any brand rack with an upright face 90mm (3.5") wide. RS90 is 457mm (18") tall with an overall width of 159mm (6.25"). The opening is 90x75mm (3.5"x3") but will fit any rack with the correct width face.
Sold by the Carton of 14 Rack Sentry® rack protectors attach to your rack uprights, protecting them from the abuse from collisions with your forklifts. Constructed of a flexible EVA material, Rack Sentry® gives your racks a highly visible layer of protection that's easily installed without tools. Rack Sentry is available in a number of sizes to fit most uprights. Additionally, there are models available for low beam installations and for end racks. Rack Sentry® is ideal for intermediate rack uprights where high visibility and a flexible layer of protection is most needed. The product is designed to absorb impact by flexing, returning to shape to work again. We have tested Rack Sentry® to a limit of 3mph (5km/h) using a 5,000 lb. (capacity) forklift without visible damage to the rack upright, forklift, or product. Rack Sentry® installs directly to the rack upright, eliminating the need to drill into the floor at the rack upright. In use, Rack Sentry® puts no stress on the floor. For use in temperatures below 0°C, the use of Rack Sentry LT (Low Temperature) is recommended.
Fits any brand rack with an upright face 100mm (4") wide. RS100CO is 457mm (18") tall with an overall width of 159mm(6.25"). The CO version includes a 150mm (6") offset cutout 127mm (5") from one end to cover racks with low beams.