Payment Processing



PayPal Logo
Home > Fall Protection > Harness Accessories
Sort By:
Page of 2
FS813 - Safewaze 18" D-Ring Extender
FS813 - Safewaze 18" D-Ring Extender
Our Price: $35.40

18" D-Ring Extender


The SafeWaze FS813 D-ring extender provides additional length between the dorsal D-ring of the harness and connection to another component of their personal fall arrest system. It comes complete with a convenient snap hook end and opposite end D-ring for quick and easy connection.

  • 18″ D-ring extender with double locking snap hook on one end and D-ring on the other
  • Materials - 1.75 in (44.45 mm) Polyester webbing; High-strength polyester stitching; Forged steel D-rings
  • Weight/Capacity Maximum working Load - 310 lbs (140.61 kg)
  • Length - 18"
  • Hook Ratings - 5,000 lbs Minimum breaking Strength, Gate Rated 3,600 lbs
  • Applicable Standards - Meets OSHA 1926-502, ANSI Z359.1, ANSI A10.32

SAFEWAZE FS813 TECH DATA SHEET.pdf

SAFEWAZE Lanyard Instruction Manual Compressed Version.pdf

more info
9501403 - 3M Suspension Trauma Strap
9501403 - 3M Suspension Trauma Strap
Our Price: $41.14

3M™ DBI-SALA® Suspension Trauma Safety Straps

The Suspension Trauma Safety Strap was designed to help a worker overcome the potential negative health impacts of suspension trauma (otherwise known as Orthostatic Intolerance). This condition can occur when a person remains suspended at height (after a fall) for even short periods of time. Suspension in a harness may cause blood to pool in the veins of the legs which can result in unconsciousness; if not rescued promptly, serious injury or death may occur. OSHA requires that employers provide for prompt rescue of employees in the event of a fall. The Suspension Trauma Safety Strap is designed to prevent suspension trauma while a worker is awaiting rescue.

Sold by the each


Features:
  • Suspension Trauma Safety Strap helps prevent the effects of suspension trauma after a fall
  • Allows worker who is suspended to stand up in their harness to relieve pressure
  • A safety accessory that can be attached to most harness brands/styles right in the field
  • Installation to your harness is fast and efficient - just choke off to strap and it's ready
  • Extremely compact and lightweight design stays out of the worker's way
  • Deployment and operation is fool-proof, simply unzip, and hook straps together
  • Continuous loop design allows for either one or two-foot suspension relief without pinching


5902486C Suspension Trauma Safety Straps (PDF, 1.6MB)

3M™ DBI-SALA® Suspension Trauma Safety Straps 9501403 | 3M United States
more info
9501207 - 3M Delta Comfort Pad for Wrap-Around Comfort
9501207 - 3M Delta Comfort Pad for Wrap-Around Comfort
Our Price: $47.14

3M™ DBI-SALA® Delta™ Comfort Pad, Universal

Shoulder and back pad with hook-and-loop attachment to harness and built-in lanyard keepers.


Sold by the each


Features:
  • Shoulder and back pad for harness
  • Provides added comfort
  • Hook-and-loop attachment to harnesses
  • Heavy-duty nylon with soft Lycra® and foam
  • Non-slip design
  • Built-in breakaway lanyard keepers
  • Compact and lightweight design
3M™ DBI-SALA® Delta™ Comfort Pad 9501207, Universal, 1 EA | 3M United States
more info
Guardian 01610
01610 - Guardian Rebar Web Assembly
Our Price: $85.67

The Guardian Fall Protection Rebar Positioning Device is perfect for Work Positioning applications on rebar structures. Its double legs allow workers to lean away from walls, while keeping their hands free to perform any necessary work. To function correctly, it must be used in combination with a full-body harness with side positioning D-rings, so that both snap hook components can be properly attached. All chain assemblies are adjustable, and a variety of connector options are available.

Sold by the each



Features:
more info
Guardian 02001
02001 - Guardian Replacement Flame Retardant Panel
Our Price: $104.80

02001 - Guardian Replacement Flame Retardant Panel - Pair

Easy to use, snap-on replacement cover. Flame retardant.
Sold by the each
more info
01608 - Guardian Rebar Chain Assembly ANSI Compliant w/ Grade 890 Chain & High Strength Rebar & Snap Hooks
01608 - Guardian Rebar Chain Assembly ANSI Compliant w/ Grade 890 Chain & High Strength Rebar & Snap Hooks
Our Price: $138.93

The Guardian Fall Protection "Rebar Positioning Devices" allow workers to lean away from walls while keeping their hands free. They must be accompanied by a harness with side positioning D-rings. Free fall must be limited to less than 2 feet if not using a fall arrest system. Positioning device systems are combinations of equipment which are intended to permit the user to use both hands freely while being supported on an elevated vertical surface as in rebar and concrete form work. Our #01608 unit is designed to comply the latest, most stringent requirement of ANSI A10.32-2004, among which (a) the chain must be grade 80 and 9/32 inch or greater and (b) offer an overall minimum tensile strength of 5,000 pound. All chain assemblies come with quick links for easy length adjustments.



Sold by the each


Features:
more info
1001140 - 3M Boatswain Chair without Belt
1001140 - 3M Boatswain Chair without Belt
Our Price: $176.58

DBI/SALA manufactures a complete line of workseats including boatswain's chairs, seat slings and suspension workseats. This boatswain's chair adds a body belt to the basic chair for added support.



Sold by the each



Features:
  • Dimensions: 12" x 24" x 1" board
3M™ DBI-SALA® Bosun's Chair | 3M United States
more info
018-5009 - 7' Web Retractable with Aluminum Snap Hook
018-5009 - 7' Web Retractable with Aluminum Snap Hook
Our Price: $196.17

7' Web Retractable with Aluminum Snap Hook

Sold by the EA

The Safewaze 018-5009 single leg unit with an aluminum snap hook is lightweight and has a durable translucent housing that not only looks unique, but protects the internal components from debris and contamination. The housing also makes for easy viewing and inspection of the webbing, reserve line, and pawl assembly. This unit comes with a steel carabiner

FEATURES

  • 7′ Web retractable
  • Aluminum snap hook
  • High-strength transparent plastic housing for enhanced unit inspection
  • .77 in (19.5 mm) Ultrahigh Molecular Weight Webbing
  • Swivel top for enhanced mobility
  • Product data label incorporated into webbing and protected by cover
  • Revolutionary breaking system that alleviates the need for an external shock pack
  • Includes carabiner
DATA SHEET

MANUAL

PRODUCT OVERVIEW VIDEO


more info
1001090 - 3M Full Support Workseat
1001090 - 3M Full Support Workseat
Our Price: $204.00

DBI/SALA manufactures a complete line of workseats including boatswain's chairs, seat slings and suspension workseats. This seat sling is designed to be added to one of our harnesses to provide added support and comfort while suspended or during work positioning activities.


Sold by the each



Features:
  • Designed for attachment (add-on) to our harnesses for extra support
  • 8" wide seat sling provides comfort while suspending or positioning
  • Incorporates belt attachment loops making attachment to harness easy
  • 1-3/4" latex treated polyester webbing construction for added durability
  • Suspension D-rings coated for corrosion resistance
  • Meets or exceeds all applicable industry standards including OSHA and ANSI
3M™ DBI-SALA® Seat Sling with Belt Loops | 3M United States
more info
1000570 - 3M Derrick Hand Belly Monkey Board With Pass-Thru Attachment
1000570 - 3M Derrick Hand Belly Monkey Board With Pass-Thru Attachment
Our Price: $270.86

These unique and specialized derrick belts are designed for personnel performing work on the monkey or tubing board. They provide the worker with fall protection and comfort with the large frontal pad while leaning outward and positioning for the next drilling pipe.


Sold by the each


Features:

more info
   
 
Copyright ©  SENTRY SAFETY SUPPLY, INC.. All Rights Reserved.Built with Volusion