Payment Processing



PayPal Logo
Home > Fall Protection > Fall Protection Accessories
Sort By:
Page of 5
9076/BK- Miller WristBandit Tool Holder
9076/BK- Miller WristBandit Tool Holder
Our Price: $9.41

Prevent tools from dropping that can cause serious injuries on the jobsite.
Conveniently attaches to user’s wrist with Velcro®. Tools are attached by cinching the lanyard cord around tool.


Sold by the each
9077- Miller Bandit Tool Holder Lanyard
9077- Miller Bandit Tool Holder Lanyard
Our Price: $18.77

Prevent tools from dropping that can cause serious injuries on the jobsite.

Lanyard conveniently attaches to the user’s belt. Tools are attached with the carabiner or by cinching the cord around tool.



Sold by the each
9099/36BULK- Miller Relief Step Safety Device
9099/36BULK- Miller Relief Step Safety Device
Our Price: $20.53

Helps Prevent Suspension Trauma!

The Miller Relief Step Safety Device alleviates the effects of orthostatic intolerance, also known as suspension trauma. If a fall occurs, a person becomes suspended in a harness and remains both vertical and sedentary for a period of time, causing blood to “pool” in the veins of the legs. Subsequently, blood is restricted to the brain and other major organs that may initially result in unconsciousness. If not rescued promptly, serious injury or death may occur. The Miller Relief Step is designed to provide a short-term solution for alleviating suspension trauma.

STEP 1: Pull tab to deplay

STEP 2: Insert foot into loop step and adjust

Two Relief Steps provide added support, balance and comfort
  • OSHA states that potentially fatal suspension trauma can occur within minutes while waiting for rescue after a fall
  • Average fall rescue time is 15 minutes
  • When used, the Relief Step Safety Device provides support and enhances blood circulation until rescue – permitting the ability o move and flex leg muscles
  • Small and lightweight; the Relief Step Safety Device attaches to any brand full-body harness
  • Utilizing two (2) Relief Steps (one for each leg/foot) assures greater comfort until rescue is completed


Sold by the each

1201390 - Capital Safety Scaffold Choker Anchor (1.4')
1201390 - Capital Safety Scaffold Choker Anchor (1.4')
Our Price: $28.36

Our scaffold choker combines ease of use, light weight and high strength (5,000 lb. Min. tensile strength) forming a versatile anchorage connector. It's designed specifically to provide an anchor point for your personal fall protection system on scaffolding or other similar structures such as piping. Know matter what you are connecting to, DBI/SALA has a connector to get the job done and keep you safe in case of a fall.


Sold by the each



Features:

· Choker style makes attaching to anchorage quick and easy

· 1" polyester strength member (5,000 lb. Min. tensile strength)

· 17 inches in length

· Fits 3" maximum diameter structure

· Coated steel hardware for corrosion resistance and strength

· Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359

Miller 18" Harness D-Ring Extension
8928-Z7/18INBK - Miller 18" Harness D-Ring Extension
Our Price: $40.40

18-in. web extension with a snap hook and a D-ring on the opposite end. For Use With Full-Body Harness and Shock Absorbing Lanyard, Locking Snap, D-Ring, Anchorage Hook Gate Opening 2 1/4 In.





Features:

- Max. Working Load (Lb.): 400
- Tensile Strength: 5000 lbs.
- Length: 18"
- Strap Material: Polyester
- Strap Width: 1 3/4"
- Body Material: Polyester
- Mounting: Full-Body Harness Back D-Ring
- Locking Harness Connection Hook Type: Locking Snap
- Harness Hook Gate Opening: 3/4"
- Locking Anchorage Connection Hook Type: D-Ring
- Anchorage Hook Gate Opening: 2 1/4"
- Standards: OSHA, ANSI & CSA
Guardian 00210
00210 - Guardian Railmaster Pin Assembly Replacement
Our Price: $53.40

The Guardian Fall Protection "Railmaster Pin Assembly" is a replacement part intended for the Guardian "Railmaster" anchor system.


Sold by the each


Features:
  • Replacement part for Guardian "Railmaster" products (Mfg. #00200 & #00205)
416/ - Miller 416 D-Bolt Anchor With Hardware
416/ - Miller 416 D-Bolt Anchor With Hardware
Our Price: $55.73

Anchorage Connectors are designed as the intermediary for securing a connecting device to an anchorage. Careful consideration should be given to selecting a proper anchorage for ultimate safety. The anchorage should be easily accessible, located a safe distance above any lower obstacles and support 5,000 lbs (22kN) per worker.



Features:


• D-Bolt: Drop forged Alloy Steel; Zinc plated
• Hardware: 5/8-in. or 16mm diameter with grade 8 bolts 5-in. long with lock washer and nut.
• Weight: 1.5 lbs (.7kg)


Meets OSHA 1910.66, OSHA 1926.502(d),ANSI A10.32, and ANSI Z359.1 requirements.
1003006 - Capital Safety 6' Tie-Off Adaptor
1003006 - Capital Safety 6' Tie-Off Adaptor
Our Price: $58.71

Our tie-off adaptor is our most versatile anchorage connector combining ease of use, light weight and high strength (5,000 lb. Min. tensile strength). It provides you with an anchorage connector that can be used almost anywhere an anchorage point is needed. Know matter what you are connecting to, DBI/SALA has a connector to get the job done and keep you safe in case of a fall.


Sold by the each


Features:
  • Pass-through design makes attaching to anchorage quick and easy
  • 1-3/4" polyester strength member (5,000 lb. Min. tensile strength)
  • 3" wide polyester wear pad for added abrasion resistance and product longevity
  • 3 ft. in length, other lengths available
  • Coated steel hardware for corrosion resistance and strength
  • Meets or exceeds all applicable industry standards including OSHA, ANSI and the stringent ANSI Z359
  • Miller T8221-Z7/
    T8221-Z7/ - Miller Titan Positioning Rebar Chain Assembly
    Our Price: $59.03

    This 2-1/4" Locking Rebar Snap Hook from Miller Safety (T8221) provides positioning assistance. The positioning assembly has two locking snap hooks with 3/4" (19mm) gate openings and one locking rebar hook with a 2-1/4" (57mm) gate opening. This assembly is for positioning assistance only; a lifeline or lanyard is still required for fall protection.



    Features:
    • 13-link rebar chain position assembly
    • Provides positioning assistance
    • Two locking snap hooks and one locking rebar hook
    • Locking snap hooks have 3/4" (19mm) gate openings
    • Locking rebar hook has a 2-1/4" (57mm) gate opening
    • Provides positioning assistance only. Lifeline is required for fall protection


    Sold by the each
    AJ408AG - Capital Safety Coated Wire Rope Sling with Anchor Ring
    AJ408AG - Capital Safety Coated Wire Rope Sling with Anchor Ring
    Our Price: $59.14

    AJ408AG - Capital Safety Coated Wire Rope Sling with Anchor Ring


    Sold by the each


    Features:
    • Easy to install and use
    • Galvanized steel construction-available in stainless steel-Part # AJ408AS
    • Lightweight
    • Versatile, fits a variety of anchorage points
    • 3 diameter anchorage ring easily accommodates various snaphooks and carabiners
    • Coating protects anchor point and wire rope
    • 5,400 lb. rated anchorage point
    • Custom lengths available-contact Protecta
    • Meets OSHA 1926 & ANSI Z359 standards
       
     
    Copyright ©  SENTRY SAFETY SUPPLY, INC.. All Rights Reserved.Built with Volusion