Payment Processing



PayPal Logo
Home > Safety Cans & Drums > Liquid Disposal Safety Cans
Sort By:
Page of 2
10905 - Justrite 5 Gallon Drain Can with Funnel
10905 - Justrite 5 Gallon Drain Can with Funnel
Our Price: $171.54

Drain Can With Plated Steel Funnel, 5 Gallon, Steel, Red

Drain Cans for easy collection of used solvents.

Easily and safely collect used solvents from parts washing equipment with a Justrite Drain Can. Wide mouth funnel catches drainage with no spill, no mess. Removable funnel is plated steel. Built-in flame arrester keeps fire from contents. A .75" threaded plug allows safe disposal of waste liquids from the drain can into a permanent receptacle.

FM Approved
Exterior Dimensions 16.75" H x 11.625" Outer Dia.

more info
14762 - Justrite 2 Gallon (8L) Polyethylene Can with Stainless Steel Hardware
14762 - Justrite 2 Gallon (8L) Polyethylene Can with Stainless Steel Hardware
Our Price: $240.66

Safety Can For Liquid Disposal, 2 Gallon, Polyethylene, Red



High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. The broad-base design provides stability and resists accidental tip over.

Exterior dimensions 14.75" H x 12" Outer Dia.




Sold by the each
more info
14565 - Justrite 5 Gallon (19L) Polyethylene Can with Stainless Steel Hardware with 08530 Fill Gauge Built-in
14565 - Justrite 5 Gallon (19L) Polyethylene Can with Stainless Steel Hardware with 08530 Fill Gauge Built-in
Our Price: $263.56

Safety Can For Liquid Disposal, 5 Gallon, Built-In Fill Gauge, Polyethylene, Red



High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. The broad-base design provides stability and resists accidental tip over.


Built-in polyethylene fill gauge indicator pops up to warn you that the container is almost full.

Exterior Dimensions 20" H x 12" Outer Dia.


Sold by the each

more info
14765 - Justrite 5 Gallon (19L) Polyethylene Can with Stainless Steel Hardware
14765 - Justrite 5 Gallon (19L) Polyethylene Can with Stainless Steel Hardware
Our Price: $264.09

Safety Can For Liquid Disposal, 5 Gallon, Polyethylene, Red


High-density polyethylene (HDPE) disposal cans provide superior chemical resistance and leak protection. Spring-loaded sealed cap, normally closed, automatically vents between 3 and 5 psig (0.2 and 0.35 bar). Stainless steel handle and hardware with latch-catch system hold the cap in the open position for easy filling and pouring. Large-mouth opening features a built-in stainless steel flame arrester to guard against outside ignition. The broad-base design provides stability and resists accidental tip over.

Exterior Dimensions 20" H x 12" Outer Dia.


Sold by the each
more info
PP12752 - Justrite Two Gallon Quick-Disconnect Safety Disposal Can
PP12752 - Justrite Two Gallon Quick-Disconnect Safety Disposal Can
Our Price: $434.79

Quick-Disconnect Disposal Safety Can, Polypropylene Fittings For 3/8" Tubing, 2 Gal., Poly, White


Ideal for HPLC waste applications:

  • Vapor and fire protection
  • Safeguard against accidental spills
  • Maximize safety and convenience

Hands-free solvent collection: Solvent flows freely from your process into the container through tubing making it suitable for either pump-fed or gravity-flow HPLC waste methods. Two disconnect fittings, one intake and one vent, eliminate back pressure in liquid flow disposal line and provide controlled handling of vapor.

Durability and safety: Translucent polyethylene container allows quick visual inspection of liquid level. Pouring spout is equipped with a stainless steel flame arrester, which reliably dissipates heat to prevent flashback ignition. Spring-loaded, sealed lid automatically vents to guard against explosion. Control odors with a coalescing/carbon filter.

Quick-Disconnect system

  • Easy-on, easy-off mechanism offers detachment of the can from the process without leaks, drips or vapor release. Once disconnected, the container is automatically sealed to prevent spills.
  • Valved quick-disconnect fittings automatically close when decoupled to prevent vapor or liquid release.
  • Stainless-steel fittings offer PTFE O-rings on standard containers. Also available with EPDM O-ring seals on customized cans.
  • Coalescing carbon filter Optional filters are for use with only round style cans. Easy-carrying handle with fixed position latch keeps spring loaded cover open for convenient pouring during disposal.
  • Economically priced polypropylene barbed fittings offer EPDM O-rings.
  • Translucent color lets you check liquid level at a glance.



Sold by the each


Exterior Dimensions 14.75" H x 12" Outer Dia.

more info
PP12755 - Justrite Five Gallon Quick-Disconnect Safety Disposal Can
PP12755 - Justrite Five Gallon Quick-Disconnect Safety Disposal Can
Our Price: $468.36

Quick-Disconnect Disposal Safety Can, Polypropylene Fittings For 3/8" Tubing, 5 Gal., Poly, White.


Ideal for HPLC waste applications:

  • Vapor and fire protection
  • Safeguard against accidental spills
  • Maximize safety and convenience

Hands-free solvent collection: Solvent flows freely from your process into the container through tubing making it suitable for either pump-fed or gravity-flow HPLC waste methods. Two disconnect fittings, one intake and one vent, eliminate back pressure in liquid flow disposal line and provide controlled handling of vapor.

Durability and safety: Translucent polyethylene container allows quick visual inspection of liquid level. Pouring spout is equipped with a stainless steel flame arrester, which reliably dissipates heat to prevent flashback ignition. Spring-loaded, sealed lid automatically vents to guard against explosion. Control odors with a coalescing/carbon filter.

Quick-Disconnect system

  • Easy-on, easy-off mechanism offers detachment of the can from the process without leaks, drips or vapor release. Once disconnected, the container is automatically sealed to prevent spills.
  • Valved quick-disconnect fittings automatically close when decoupled to prevent vapor or liquid release.
  • Stainless-steel fittings offer PTFE O-rings on standard containers. Also available with EPDM O-ring seals on customized cans.
  • Coalescing carbon filterOptional filters are for use with only round style cans.
  • Easy-carrying handle with fixed position latch keeps spring loaded cover open for convenient pouring during disposal.
  • Economically priced polypropylene barbed fittings offer EPDM O-rings.
  • Translucent color lets you check liquid level at a glance.

Exterior Dimensions 20" H x 12" Outer Dia.


Sold by the each
more info
BY12755 - Justrite Five Gallon Quick-Disconnect Safety Disposal Can w/ Stainless Steel Fittings
BY12755 - Justrite Five Gallon Quick-Disconnect Safety Disposal Can w/ Stainless Steel Fittings
Our Price: $656.96

Quick-Disconnect Disposal Safety Can With Fittings For 3/8" Tubing, 5 Gallon, Polyethylene, White


Ideal for HPLC waste applications:

  • Vapor and fire protection
  • Safeguard against accidental spills
  • Maximize safety and convenience

Hands-free solvent collection: Solvent flows freely from your process into the container through tubing making it suitable for either pump-fed or gravity-flow HPLC waste methods. Two disconnect fittings, one intake and one vent, eliminate back pressure in liquid flow disposal line and provide controlled handling of vapor.

Durability and safety: Translucent polyethylene container allows quick visual inspection of liquid level. Pouring spout is equipped with a stainless steel flame arrester, which reliably dissipates heat to prevent flashback ignition. Spring-loaded, sealed lid automatically vents to guard against explosion. Control odors with a coalescing/carbon filter.

Quick-Disconnect system

  • Easy-on, easy-off mechanism offers detachment of the can from the process without leaks, drips or vapor release. Once disconnected, the container is automatically sealed to prevent spills.
  • Valved quick-disconnect fittings automatically close when decoupled to prevent vapor or liquid release.
  • Stainless-steel fittings offer PTFE O-rings on standard containers. Also available with EPDM O-ring seals on customized cans.
  • Coalescing carbon filter Optional filters are for use with only round style cans.
  • Easy-carrying handle with fixed position latch keeps spring loaded cover open for convenient pouring during disposal.
  • Economically priced polypropylene barbed fittings offer EPDM O-rings.
  • Translucent color lets you check liquid level at a glance.



Sold by the each


Exterior Dimensions 20" H x 12" Outer Dia.

more info
BY12752 - Justrite Justrite Two Gallon Quick-Disconnect Safety Disposal Can w/ Stainless Steel Fittings
BY12752 - Justrite Justrite Two Gallon Quick-Disconnect Safety Disposal Can w/ Stainless Steel Fittings
Our Price: $700.10

Quick-Disconnect Disposal Safety Can With Fittings For 3/8" Tubing, 2 Gallon, Polyethylene, White


Ideal for HPLC waste applications:

  • Vapor and fire protection
  • Safeguard against accidental spills
  • Maximize safety and convenience

Hands-free solvent collection: Solvent flows freely from your process into the container through tubing making it suitable for either pump-fed or gravity-flow HPLC waste methods. Two disconnect fittings, one intake and one vent, eliminate back pressure in liquid flow disposal line and provide controlled handling of vapor.

Durability and safety: Translucent polyethylene container allows quick visual inspection of liquid level. Pouring spout is equipped with a stainless steel flame arrester, which reliably dissipates heat to prevent flashback ignition. Spring-loaded, sealed lid automatically vents to guard against explosion. Control odors with a coalescing/carbon filter.

Quick-Disconnect system

  • Easy-on, easy-off mechanism offers detachment of the can from the process without leaks, drips or vapor release. Once disconnected, the container is automatically sealed to prevent spills.
  • Valved quick-disconnect fittings automatically close when decoupled to prevent vapor or liquid release.
  • Stainless-steel fittings offer PTFE O-rings on standard containers. Also available with EPDM O-ring seals on customized cans.
  • Coalescing carbon filter Optional filters are for use with only round style cans.
  • Easy-carrying handle with fixed position latch keeps spring loaded cover open for convenient pouring during disposal.
  • Economically priced polypropylene barbed fittings offer EPDM O-rings.
  • Translucent color lets you check liquid level at a glance.

Exterior Dimensions 14.75" H x 12" Outer Dia.

Sold by the each

more info
TF12752 - Justrite Two Gallon Quick-Disconnect Safety Disposal Can
TF12752 - Justrite Two Gallon Quick-Disconnect Safety Disposal Can
Our Price: $844.66

Quick-Disconnect Disposal Safety Can, Stainless Steel Fittings For 3/8" Tubing, 2 Gal., Poly, White


Ideal for HPLC waste applications:

  • Vapor and fire protection
  • Safeguard against accidental spills
  • Maximize safety and convenience

Hands-free solvent collection: Solvent flows freely from your process into the container through tubing making it suitable for either pump-fed or gravity-flow HPLC waste methods. Two disconnect fittings, one intake and one vent, eliminate back pressure in liquid flow disposal line and provide controlled handling of vapor.

Durability and safety: Translucent polyethylene container allows quick visual inspection of liquid level. Pouring spout is equipped with a stainless steel flame arrester, which reliably dissipates heat to prevent flashback ignition. Spring-loaded, sealed lid automatically vents to guard against explosion. Control odors with a coalescing/carbon filter.

Quick-Disconnect system

  • Easy-on, easy-off mechanism offers detachment of the can from the process without leaks, drips or vapor release. Once disconnected, the container is automatically sealed to prevent spills.
  • Valved quick-disconnect fittings automatically close when decoupled to prevent vapor or liquid release.
  • Stainless-steel fittings offer PTFE O-rings on standard containers. Also available with EPDM O-ring seals on customized cans.
  • Coalescing carbon filter Optional filters are for use with only round style cans. Easy-carrying handle with fixed position latch keeps spring loaded cover open for convenient pouring during disposal.
  • Economically priced polypropylene barbed fittings offer EPDM O-rings.
  • Translucent color lets you check liquid level at a glance.

Exterior Dimensions 14.75" H x 12" Outer Dia.


Sold by the each
more info
TF12755 - Justrite Five Gallon Quick-Disconnect Safety Disposal Can w/ Stainless Steel Fittings
TF12755 - Justrite Five Gallon Quick-Disconnect Safety Disposal Can w/ Stainless Steel Fittings
Our Price: $877.06

Quick-Disconnect Disposal Safety Can, Stainless Steel Fittings For 3/8" Tubing, 5 Gal., Poly, White



Ideal for HPLC waste applications:

  • Vapor and fire protection
  • Safeguard against accidental spills
  • Maximize safety and convenience

Hands-free solvent collection: Solvent flows freely from your process into the container through tubing making it suitable for either pump-fed or gravity-flow HPLC waste methods. Two disconnect fittings, one intake and one vent, eliminate back pressure in liquid flow disposal line and provide controlled handling of vapor.

Durability and safety: Translucent polyethylene container allows quick visual inspection of liquid level. Pouring spout is equipped with a stainless steel flame arrester, which reliably dissipates heat to prevent flashback ignition. Spring-loaded, sealed lid automatically vents to guard against explosion. Control odors with a coalescing/carbon filter.

Quick-Disconnect system

  • Easy-on, easy-off mechanism offers detachment of the can from the process without leaks, drips or vapor release. Once disconnected, the container is automatically sealed to prevent spills.
  • Valved quick-disconnect fittings automatically close when decoupled to prevent vapor or liquid release.
  • Stainless-steel fittings offer PTFE O-rings on standard containers. Also available with EPDM O-ring seals on customized cans.
  • Coalescing carbon filterOptional filters are for use with only round style cans.
  • Easy-carrying handle with fixed position latch keeps spring loaded cover open for convenient pouring during disposal.
  • Economically priced polypropylene barbed fittings offer EPDM O-rings.
  • Translucent color lets you check liquid level at a glance.



Sold by the each

Exterior Dimensions 20" H x 12" Outer Dia.


more info
   
 
Copyright ©  SENTRY SAFETY SUPPLY, INC.. All Rights Reserved.Built with Volusion