Payment Processing



PayPal Logo
Home > Welding Safety > Welding Helmets > Acccessories
Sort By:
Page of 1
Weldas 20-3200V
20-3200V - Weldas SWEATSOpad Hard Hat Replacement Sweatband 2-Pack
Our Price: $2.56

SWEATSOpad® Hard Hat Welding Sweatbands
Weldas innovative sweatband design has made wearing a helmet more comfortable, no matter what time of year it is. The SWEATSOpad has been field tested in a variety of industries and is proven to reduce "helmet head", to improve grip, and to provide maximum persperation absorption. Made of 100% fleecy cotton and flame retardant, this product features an air cushioned inner layer made of thousands of small cells to hold excessive perspiration and a hook & loop fasteners to fit all major brands of suspender (hardhats) or non-suspender (welding and face shields) type headgear.


Features:
  • One Size Fits All
  • 100% Fleecy Flame Retardant Cotton
  • Air-Cushioned Foam Inner Layer
  • Hook & Loop Fastening System

(Specific Fit for MSA Fas-Trac III suspensions)

Sold by the Pack of 2


*****Hard hat suspension not included***** -sweatband only
more info
20-3100V - Weldas SWEATSOpad Sweatband 2 Pack
20-3100V - Weldas SWEATSOpad Sweatband 2 Pack
Our Price: $2.56

Weldas innovative sweatband design has made wearing a helmet more comfortable, no matter what time of year it is. The SWEATSOpad has been field tested in a variety of industries and is proven to reduce "helmet head", to improve grip, and to provide maximum persperation absorption. Made of 100% fleecy cotton and flame retardant, this product features an air cushioned inner layer made of thousands of small cells to hold excessive perspiration and a hook & loop fasteners to fit all major brands of suspender (hardhats) or non-suspender (welding and face shields) type headgear.

Sold by the each

*****Hard hat suspension not included***** -sweatband only

more info
20-3400 - Weldas SWEATSOpad Extra-Wide Sweatband
20-3400 - Weldas SWEATSOpad Extra-Wide Sweatband
Our Price: $2.56

SWEATSOpad® Welding Helmet Sweatband-Extra Wide

Weldas innovative sweatband design has made wearing a helmet more comfortable, no matter what time of year it is. The SWEATSOpad has been field tested in a variety of industries and is proven to reduce "helmet head", to improve grip, and to provide maximum persperation absorption. Made of 100% fleecy cotton and flame retardant, this product features an air cushioned inner layer made of thousands of small cells to hold excessive perspiration and a hook & loop fasteners to fit all major brands of suspender (hardhats) or non-suspender (welding and face shields) type headgear.

Sold by the each

*****Hard hat suspension not included***** -sweatband only
more info
Moldex 4200
4200 - Moldex Airwave N95 Respirator
Our Price: $17.88

4200 N95 AirWave Series Particulate Respirators Medium/Large
The outstanding performance of the AirWave is due to its patent-pending, wave design technology. It allows more airflow in and out of the respirator for cool comfort and easier breathing. By providing more surface area, AirWave ensures cool comfort inside the respirator, without a valve. Plus our exclusive FlexFitdesign provides added comfort and compliance over time.



Sold by the box of 10



Features:

  • Exclusive easy-breathing wave design
  • Less resistance, better breathability*
  • Ideal where unvalved respirators are preferred
  • Less cost than valved respirators
  • Longer wear means less cost
  • Softspun® lining for increased comfort and durability.
  • Soft foam nose cushion and contour shaped for comfort
  • Pinch free nose bridge
  • Meets heat and flame resistance in accordance with ANSI/ISEA 110-2003 Section 7.11.1.
  • NIOSH approved 95% efficient against solid and liquid particulates, excluding oil based particulates.


Common N95 APPLICATIONS:

Hot and humid environments such as Grinding, Torch Cutting, Sanding, Metal Pouring, Sweeping, Metal Working, Bagging, Foundries, Stone Quarrying, Agriculture, Metal Machining, Construction Sites, Cement, Ceramics Manufacturing, Underground Mining, Timber/Lumber Mills, Polishing, Buffing, Lime, Poultry, Textiles, Welding, Brazing, Soldering.No oils present. Note: For areas with oils present, you must use an R or P respirator.

more info
Moldex 2300N95
2300N95 - Moldex 2-Strap N95 Particulate Respirator with Exhale Valve
Our Price: $27.96

2300N95 Series Particulate Respirators With Exhale Valve

Workers stay cooler with an exhale valve that reduces hot air build up. There’s less breathing resistance and workers don’t have to break midshift to cool off. The molded nose bridge with soft foam nose cushion provides the wearer an easy comfortable fit. There’s no metal noseband to adjust and the seal is maintained without pressure points. The Dura-Mesh® shell, exclusive to Moldex®, protects the filter media so it stays cleaner-looking longer. The shell resists collapsing, even in heat and humidity so the respirator holds its shape longer. The result is fewer respirators used and lowered costs. 2300 Series Particulate Respirators are suitable for most welding applications. Dura-Mesh®’s Dura-Mesh® shell resists collapsing in hot humid conditions common to most welding applications. Meets heat and flame resistance in accordance with ANSI/ISEA 110.2003 Section 7.11.1.

Features

  • Exhale valve lets workers breathe easy and stay cool
  • Dura-Mesh® shell resists collapsing in heat and humidity
  • Molded nose bridge seals easily without a metal noseband
  • Facepiece is naturally contoured without pressure points
  • Straps are securely attached so they don’t break at the seal
  • Softspun® lining for increased comfort and durability
  • Soft foam nose cushion for added comfort
  • Available in three sizes to fit more workers and increase OSHA compliance
  • NIOSH certified to have a filter efficiency of 95% or greater for non-oil based particulates
  • Certified under 42CFR84
  • Meets heat and flame resistance in accordance with ANSI/ISEA 110-2009 Section 7.11.1
  • Suitable for most welding applications
  • 100% PVC-Free, like all Moldex products & packaging - for a greener alternative




N95 APPLICATIONS:

Grinding, Torch Cutting, Sanding, Metal Pouring, Sweeping, Metal Working, Bagging, Foundries, Stone Quarrying, Agriculture, Metal Machining, Construction Sites, Cement, Ceramics Manufacturing, Underground Mining, Timber/Lumber Mills, Polishing, Buffing, Lime, Poultry, Textiles, Welding, Brazing, Soldering.

No oils present. Note: For areas with oils present, you must use an R or P respirator.

Sold by the Box of 10

https://www.moldex.com/wp-content/uploads/2300-807-REV-A-1-19-data-sheet.pdf

https://www.moldex.com/wp-content/uploads/Combo_Fitting_Poster.pdf

more info
M2800N95 - Moldex Special Ops Plus Relief From OV/Particulate Respirators With HandyStrap® & Ventex® Valve
M2800N95 - Moldex Special Ops Plus Relief From OV/Particulate Respirators With HandyStrap® & Ventex® Valve
Our Price: $55.12

2800N95 Plus Relief From Organic Vapors Series Particulate Respirators With HandyStrap® & Ventex® Valve

Features

· HandyStrap allows mask to hang down loosely and comfortably around the user's neck when not in use
· Cloth HandyStrap feels cool and comfortable
· Added carbon layer helps filter out nuisance levels of ozone and organic vapors (less than OSHA PEL)
· Can be used against most welding fumes (free of oil)
· Fits easily under welding hoods
· Ventex valve lets the hot air out faster so workers breathe easier and stay cooler
· Soft foam nose cushion for added comfort and less pressure
· Dura-Mesh® shell resists collapsing in heat and humidity
· Molded nose bridge seals easily without a metal noseband
· Facepiece is naturally contoured for less pressure
· Softspun® lining for increased comfort and durability
· NIOSH certified to have a filter efficiency of 95% against non-oil based particulates
· Certified under 42CFR84
· Meets heat and flame resistance in accordance with ANSI/ISEA 110-2009 Section 7.11.1
· Available in two sizes, for most workers and OSHA compliance
· 100% PVC-Free, like all Moldex products & packaging - for a greener alternative
· Made in U.S.A.


Sold by the box (of 10)

Common Applications

Welding, Arc Cutting, Foundry Operations, Brazing, Plasma Spraying, Laser Beam Cutting/Welding, Laboratory Settings, Agriculture, Petrochemical Manufacturing, Rendering Plants, Auto Repair, Mining Operations, Waste Disposal. No oils present. Note: For areas with oils present, you must use an R or P respirator.

2800 HandyStrap® Datasheet

Fitting Poster

more info
8214 - 3Mâ„¢ Particulate Respirator N95 W/Faceseal & Nuisance Level OV Relief
8214 - 3M™ Particulate Respirator N95 W/Faceseal & Nuisance Level OV Relief
Our Price: $75.13

3M™ Particulate Respirator 8214, N95, with Faceseal and Nuisance Level Organic Vapor Relief

This disposable N95 particulate welding respirator with carbon layer helps provide respiratory protection where metal fumes may be present including those with ozone* and nuisance level organic vapors**. Features foam faceseal and 3M™ Cool Flow™ Valve.

The lightweight, disposable N95 particulate respirator is designed to help provide respiratory protection for certain non oil particles in applications such as welding, soldering and other operations in which metal fumes may be present. 3M uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs. The specially designed cake resistant filter media provides longer respirator life. The respirator incorporates 3M's proprietary technology with advanced electrostatically charged microfiber filter media, designed for ease of breathing. The proprietary 3M™ Cool Flow™ Exhalation Valve helps reduce heat build up inside the respirator to help keep the wearer more comfortable. These combined features, along with the foam face seal and fully adjustable straps are designed to help enhance user comfort and increase wearability.
• N95 Approved filtering facepiece particulate respirator
• 3M™ Cool Flow™ Exhalation Valve
• Comfortable foam face seal
• Cake resistant filter media
• Flame resistant as demonstrated per modified ASTM D2859 (not a substitute for a faceshield)
• Carbon filter material for ozone* and nuisance level organic vapors**
• Compatible with a variety of protective eyewear and hearing protection
• Adjustable noseclip helps provide a custom and secure seal

Sold by the box of 10

3M™ Particulate Respirator, 8214, N95 Technical Specification

3M™ Particulate Respirator N95, 8214, 8514 User Instructions

Recommended Applications

Grinding
Processing of Minerals
Cleaning
Welding
Foundry Operations
Assembly and Mechanical
Petrochemical
Petrochemical Manufacturing
Composite Finishing
Paint Preparation
Final Finish

more info
   
 
Copyright ©  SENTRY SAFETY SUPPLY, INC.. All Rights Reserved.Built with Volusion