|
|
|
|
|
|
0501 - 3M Pre-Filter Retainer Clips
|
|
|
Used to hold 3M Particulate Filters 5N11 and 5P71/07194(AAD) in place on top of 3M Respirators 5000 Series and 3M Cartridges 6000 Series.
Sold by the each
|
|
|
|
|
|
|
|
|
|
502 - 3M Particulate Filter Adapters
|
|
|
Use to attach 3M Particulate Filters 2000 Series and 7093 to the 3MTM Respirators 5000 Series and 3MTM Cartridges 6000 Series for a wide variety of applications.
Sold by the each
Recommended Application
Assembly and Mechanical, Painting, Cleaning
|
|
|
|
|
|
|
|
|
|
HCW100 - Pyramex Hygienic Cleaning Wipes for PPE
|
|
|
100 Individually Packaged Alcohol Free Hygienic Wipes
- For Personal Protection Equipment such as respirators, personal equipment, self-contained breathing apparatus, hard hat suspensions
- Removes Body Oils and Perspiration from Respirators and PPE
- Alcohol Free
- 100 Individually Wrapped Towelettes Per Box
|
|
|
|
|
|
|
|
|
|
2091 - 3M P100 Particulate Filters
|
|
|
3M™ Particulate Filter 2091, P100
- Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
- Versatile protection against many oil and non-oil based particulate contaminants
- Bayonet compatibility allows use with many 3M™ half and full facepiece designs
- Wide range of applications reduces inventory needs and training requirements
NIOSH approved for environments containing certain oil and non-oil based particles. The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The filter works with a wide range of facepieces, including 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M™ Adapter 502, the filter may also be used with 3M™ Respirator 5000 Series or 3M™ Cartridge 6000 Series. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain oil and non-oil based particles. The filter has been assigned the color code “magenta” in the NIOSH system. Passing NIOSH’s P-series test criteria, the 2091 P100 filter provides at least 99.97 percent filter efficiency against particles. Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 2091 to help reduce exposure to certain particles.
Sold by the Package of 2
The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
Recommended Industry
Construction
Design & Construction
Facility Sanitation
Food Processing
Food Safety
General Manufacturing
Heavy Infrastructure
Industrial Maintenance
Marine
Metal Production & Fabrication
Mining
Oil & Gas
Transportation
|
|
|
|
|
|
|
|
|
|
818342 - MSA Advantage P100 FLEXI-FILTER PAD 2 PK
|
|
|
Advantage® Flexi-Filters®
Flexi-Filter P100
P100 Particulate Filter Pad, Low Profile, Flexible, Color Magenta, Use With 200LS, 1000, 3000 Series Respirators, Package 2.
Sold by the package, 2 filters per package
Lightweight, low-profile Flexi-Filter Pads make it easy for wearers to work for hours without fatigue or overheating. The swept-back design increases user field of vision, while low-breathing resistance ensures hours of comfort. Convenient finger tabs ensure easy installation and removal.
Lightweight, low-profile filters
offer minimal breathing resistance Swept-back design offers high
visibility Finger tabs make easy on/off
Markets: Utilities, Oil & Gas, Construction,
General Industry
Applications: Welding, Search & Rescue
|
|
|
|
|
|
|
|
|
|
770092 - Honeywell Replacement Suspension for 5500 and 7700 Series Respirators
|
|
|
Silicone Replacement Cradle Suspension system for the North 5500 & 7700 series of half mask respirators.
Sold by the each
|
|
|
|
|
|
|
|
|
|
FT-11 - 3M Sensitivity Solution Sweet Tasting
|
|
|
Used to test the sensitivity of the respirator wearer to a saccharin solution. It is used with the 3M Qualitative Fit Test Apparatus FT-10 and 3M Training and Fit Testing Case FT-20.
Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter.
Sold by the each
- Sweet taste sensitivity solution for fit testing
- Used with the 3M™ Qualitative Fit Test Apparatus FT-10 and 3M™ Training and Fit Testing Case FT-20
- Can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter
- For Occupational Use Only
Used to test the sensitivity of the respirator wearer to a saccharin solution. It is used with the 3M™ Qualitative Fit Test Apparatus FT 10 and 3M™ Training and Fit Testing Case FT 20.
Respirator Fit Test Product Sheet
|
|
|
|
|
|
|
|
|
|
FT-31 - 3M Sensitivity Solution Bitter Tasting
|
|
|
Used to test the sensitivity of the respirator wearer to a bitter solution. It is used with the 3M™ Qualitative Fit Test Apparatus FT-30. Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate pre-filter.
Sold by the each
- Bitter taste sensitivity solution for fit testing
- Used with the 3M™ Qualitative Fit Test Apparatus FT-30
- Can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter
- For Occupational Use Only
|
|
|
|
|
|
|
|
|
|
FT-32 - 3M Fit Test Solution Bitter Tasting
|
|
|
Meets the performance criteria for fit testing respirators under the current OSHA Standard for Respirator Protection: 29 CFR 1910.134, Appendix A.
Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter.
Sold by the each
- Bitter taste fit test solution for fit testing
- Used with the 3M™ Qualitative Fit Test Apparatus FT-30
- Can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter
- For Occupational Use Only
|
|
|
|
|
|
|
|
|
|
FT-12 - 3M Fit Test Solution Sweet Tasting
|
|
|
Meets the performance criteria for fit testing respirators under the current OSHA Standard for Respirator Protection: 29 CFR 1910.134, Appendix A. Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate pre-filter.
Sold by the each
- Sweet taste fit test solution for fit testing
- Used with the 3M™ Qualitative Fit Test Apparatus FT-10 and 3M™ Training and Fit Testing Case FT-20
- Can be used to check face-to-respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter
- For Occupational Use Only
|
|
|
|
Customer Service: (800) 322-6822
